CH341A 24 25 DVD USB multifunction programmer
Overview:
Currently 24 and 25 series FLASH has been very popular . For these chips burn , only be supported by a professional programmer , but the price is very expensive professional programmer , not the general maintenance of the user can have ; so we can support 24 to produce a series of EEPROM and ST, WINB IND, AMIC, MXIC, SST, SPANSION, EON, PMC and other manufacturers of 8 feet 25 series chip programmer.
features:
1, using specially produced CH341A chip USB . USB1.1 communications. Programming faster than ordinary ATMEGA8 do 25
Series Programmer 2-3 times faster . Erase the programming speed is probably 2-3Mbit check every minute . Very suitable for amateur programmer
24 and 25 series FLASH.
2, support WIN98, WINME, WIN2K, WINXP, VISTA, WIN7-32 bits, etc. operating systems.
3, using USB port power supply
2 : the programmer into the computer USB port , open the "CH341A programmer software " in the capacity of a good programmer software to select the chip , the chip can be programmed and erased .
Online Download (USB to serial , P / S end cap jump off )
The programmer plugged into the computer USB port , TX on foot programmer received nine of the RX, RX received nine of the TX, GND received nine of the GND.
Choosing the corresponding COM port , open the corresponding platform for downloading software , you can upgrade your online in nine crashed. ( Upgrade software is not included with the software programmer )
Driver Installation:
1: Install the parallel port driver ( 24 and 25 series FLASH programmer used to drive )
The PCB board P / S hop cap closed end
Detailed installation steps , see "CH341A parallel port driver and installation instructions -TB" folder description
2 : Install the serial driver (USB to serial , and other support in nine models with serial online download online download )
The PCB board P / S end cap removed jump
Detailed installation steps , see "CH341A serial port driver and installation instructions -TB" folder description
24 series chip programmer (P / S terminal jumper cap closed )
: The programmer into the computer USB port , open the "USB port 24-25 series programmer " in the capacity of good chip programming software selection , and can be programmed . 25 series chip programmer (P / S terminal jumper cap closed )
6 Reading 25X80 series 8M only nine seconds .25 X80 chip Sassafras except - . Blank check - Programming - efficacy completed only 4 steps 1 minute 06 seconds